Chimney work based on the full fault
Inspect high-level masonry
We check bricks and mortar for movement, erosion and points of water entry.
Seal the roof junction
We assess flashing where the chimney meets the surrounding roof covering.
Catch defects earlier
Maintenance can address weak joints before damage spreads through the stack.
Stop chimney defects reaching the roof below
A chimney stands in an exposed position, so worn mortar and loose masonry can soon become more than a cosmetic problem. Water may enter through damaged brickwork, a failed crown or the junction with the roof. We carry out chimney repair after checking both the stack and its surrounding covering. Warning signs include eroded joints, leaning or loose pieces, damaged flashing and stains in the loft or upper rooms. Finding the route early can prevent a small masonry defect from soaking nearby timbers and internal finishes.
Repair masonry and weatherproof details together
Our work can include repointing, mortar renewal, local rebuilding and lead-flashing repair. We also inspect relevant pots, caps, crowns and liners where their condition forms part of the problem. The correct scope depends on structural stability as well as water resistance, so we don't treat cracked mortar and failed flashing as unrelated faults. Preventative maintenance can catch open joints or movement before larger sections need rebuilding. We explain what is defective, what can remain and how the agreed repair will protect the roof junction.
Frequently asked questions
What are the signs that a chimney needs repair?
Look for loose masonry, crumbling mortar, damaged flashing or water marks near the stack. Pieces on the roof or ground also need prompt attention. We inspect the masonry and roof junction to establish the repair required.
Can damaged flashing cause a chimney leak?
Yes. Flashing seals the point where the stack passes through the roof, and gaps can let rain beneath the covering. We check the flashing alongside the masonry because water may enter through either area or through both at once.
Does every cracked joint require rebuilding?
No. Local repointing may be suitable where the masonry remains stable. Rebuilding becomes more likely where bricks are badly damaged or sections have moved. We base the recommendation on the stack's condition rather than the appearance of one joint.